New Machinery Archives - AFM Europe AFM Europe New and Used Metal Working, Fabrication & Sheet Metal Machinery Wed, 07 Oct 2026 09:56:43 +0000 en-GB hourly 1 https://wordpress.org/?v=7.1.3 Pearson ZYC Pressbrake https://www.afmeurope.co.uk/product/zyc-pressbrake-hydraulic-new/ Wed, 28 Jan 2026 12:08:05 +0000 https://www.afmeurope.co.uk/?post_type=product&p=14503 ZYC Hydraulic Pressbrake , high quality, reliable and user friendly machines designed to enhance your fabrication capabilities.

The post Pearson ZYC Pressbrake appeared first on AFM Europe.

]]>

• Cybelec Cybtouch 12 Graphical controller
• Multi axis backgauge. 2 Axis is as standard (X&R Programmable, Z manual), 
• Automatic Crowning system 
• 2 front support arms running on linear rails
• Servo Motors
• CE Marked
• DSP Front Laser guards and rear interlocked gates

The post Pearson ZYC Pressbrake appeared first on AFM Europe.

]]> Glorystar GS-TG https://www.afmeurope.co.uk/product/glorystar-gs-tg/ Fri, 01 Mar 2024 09:59:57 +0000 https://www.afmeurope.co.uk/?post_type=product&p=14046 Dual-Chuck Fiber Laser Tube Cutting Machine | GS-TG SERIES

【Clean cutting】【High precision】

  • Dust extraction and slag removal maintain a clean environment.
  • High-strength chuck bed ensures stability and prevents deformation.
  • Precision cutting with under 0.1mm concentricity and short-tail support.
  • Bevel cutting with adjustable angles for versatile profiles.

Introducing our exclusive new partnership - GLORYSTAR - AFM Europe New and Used Metal Working, Fabrication & Sheet Metal Machinery

The post Glorystar GS-TG appeared first on AFM Europe.

]]>
Chuck with the highest standards in the industry:

High security -Large inner hole of chuck, high safety for automatic loading & unloading.
Strong stability – Integral built-in drive structure, gear and rack linkage, greatly improving transmission accuracy and stability
Intelligent -self-adaptive pipe diameter, supporting different sizes of pipes, no need to replace the jaws.
High precision – The roller accuracy is 0.005mm, and the clamping accuracy is less than 0.1mm
Excellent Dust Removal System – Built-in system to avoid cutting dust from entering.
Low noise — Top quality gear precision in the industry
Less inertia – Creates high-speed processing and allows the rapid cutting of small pipe fittings
Less tailing – The material can reach the front chuck as far as possible to realize ultra-short tail cutting
Strong clamping force – The claw adopts a special friction surface to ensure that the clamping pipe does not slip off
High rigidity – Barrel structure design, high supporting rigidity and strong stability
Shaped tube clamping – With dedicated jaws, it can clamp non-closed pipes, such as channel steel (C-shaped steel), I-beam (H-shaped steel). Optional double-row roller jaws for efficient cutting of very small tubes (10~30 mm)		  
Efficient automatic unloading:

The two variable diameter wheels at the blanking place automatically rise and fall, supporting the workpiece when rising, and the workpiece slides down automatically when falling, greatly improving productivity.
Optional Automatic Loading System:

 

  

 
Machine can support the following:

square pipe with a side length of 15-150mm

round pipe with a diameter of 15-210mm

special-shaped pipe processing such as channel steel (C-shaped steel),

I-beam (H-shaped steel), etc.

The cutting shape is complete, meeting diversified processing needs, ultra-high cost performance.
Dust removal system:

The dust removal system is independently researched and developed by Glorystar Laser.

Ventilation design inside the chuck and inside the pipe to reduce the slag hanging in the pipe

  

 

 

Feature/Model GS-6022TG GS-6032TG
Chuck specifications 220 320
Through-hole diameter (mm） 225 325
Processing range(mm)

Circle tube

Square tube

Rectangle tube

 15-210

15-140

160*80

 15~320

15~220

300*100
Maximum tube cutting     length 6000mm*φ220mm 6000mm*φ320mm
Repeated positioning accuracy ≤0.03mm ≤0.03mm
Positioning accuracy ≤0.05mm ≤0.05mm
Maximum positioning speed 100m/min 70m/min
Maximum acceleration 1G 0.7G
Maximum speed of chuck 100r/min 60r/min
Tube weight ≤240kg ≤450kg
Machine weight 5.5t 6.3t
Covering area 11380mm*2000mm 11000mm*3000mm

The post Glorystar GS-TG appeared first on AFM Europe.

]]> Cutmaster VR- Variable Rake Guillotine – ZYS https://www.afmeurope.co.uk/product/cutmaster-vr-variable-rake-guillotine/ Mon, 13 Nov 2023 09:11:42 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13864 The PEARSON Cutmaster VR NC range of variable rake guillotines are heavy duty, robust machines designed for continuous use ensuring a long working life.

 

The post Cutmaster VR- Variable Rake Guillotine – ZYS appeared first on AFM Europe.

]]>
  • Estun controller manually controls blade gap, backgauge, stroke and cutting angle
  • 1000mm ballscrew backgauge
  • High quality top and bottom blades with 4 cutting edges
  • Support table with roller bearings
  • Front support arms with ruler and flip-stop
  • Foot pedal available for single or continuous cutting
  • Shadow Lights
  • Rear Light Guard

    • The post Cutmaster VR- Variable Rake Guillotine – ZYS appeared first on AFM Europe.

    ]]>         Glorystar GS-CE Fiber Laser https://www.afmeurope.co.uk/product/glorystar-gs-ce-fiber-laser/ Fri, 27 Oct 2023 12:15:25 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13846 The Glorystar GS-CE range of fiber lasers have a cutting area of 3m x 1.5m up to 12m x 2.5m,  automatic shuttle table with dual pallet changer, enabling continuous cutting while parts are safely loaded and unloaded outside of the cutting enclosure.  First class components ensure superior cut quality, high reliability and reduced down time.

    Introducing our exclusive new partnership - GLORYSTAR - AFM Europe New and Used Metal Working, Fabrication & Sheet Metal Machinery

    The post Glorystar GS-CE Fiber Laser appeared first on AFM Europe.

    ]]>

    The machine can be equipped with a power source from 1.5kw up to 30kw. Panasonic motors and drives for the X & Y axis, as well as ethercat technology results in fast acceleration, fast positioning speeds and fast cutting times.

    The control is by Cypcut and includes software for drawing parts or importing DXF files.

    High Speed

    Using industry-leading servo motors, offering high positioning speeds of 120m/min helping you achieve higher production efficiency and output in a shorter time.

    High Precision

    High Precision ball screws and linear guides help to achieve a positional accuracy of +or- 0.03mm, and a consistent cut quality.

    Dual Shuttle Table:

    The machine maximises uptime with an integrated shuttle table system that allows one table to be loaded/unloaded while cutting on the other table. Table changeover is complete in just 14 seconds on our 3 x 1.5m model.
    Powerful Dust Removal System:

    Automatic zoning dust removal, effectively removes dust, debris and smoke during the whole cutting process. Safe and environmentally friendly.
    Cutting Capacity
      1500W 2000W 3000W 4000W 6000W
    Stainless Steel 1-6mm 1-8mm 1-10mm 1-14mm 1-25mm
    Aluminium 1-4mm 1-6mm 1-8mm 1-10mm 1-20mm
    Carbon Steel 1-16mm 1-18mm 1-22mm 1-22mm 1-30mm
    Brass 1-3mm 1-5mm 1-6mm 1-8mm 1-12mm

     

    Name Brand Performance advantage
    Laser Source RAYCUS/MAX PHOTONICS Excellent beam quality under high power, with large surface area/volume for gain cut-off, inherent fully enclosed flexible optical path, maintenance-free optical path, single junction diode (pump optical module); over 100,000 hours of service life, small size Light weight, easy integration, high output power, water and electricity saving and cost saving.
    Laser Cutting Head Glorystar/BLT Automatic focusing to improve cutting efficiency whilst ensuring Stability and reliability;

    Servo motor is used for focusing, the focus stroke is large, and thick plates can be cut
    Software System FSCUT Strong compatibility, with advanced function modules such as capacitor edge seeking, electric focusing, plate/ tube cutting, fly cutting, leapfrogging, compensation, power-off memory, etc.

    The post Glorystar GS-CE Fiber Laser appeared first on AFM Europe.

    ]]>         Glorystar GS-C – Single Table Fiber Laser https://www.afmeurope.co.uk/product/glorystar-gs-c-single-table-fiber-laser/ Fri, 27 Oct 2023 10:27:45 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13822 The Glorystar GS-C range of fiber lasers are equipped with a 3m x 1.5m or 4.0m x 2.0m cutting area with a motorised front load table, which simply sides in and out of the machine. Material can be easily loaded and unloaded outside of the machine enclosure, giving the option to load material by crane as well as manually.

    Introducing our exclusive new partnership - GLORYSTAR - AFM Europe New and Used Metal Working, Fabrication & Sheet Metal Machinery

    The post Glorystar GS-C – Single Table Fiber Laser appeared first on AFM Europe.

    ]]>     The machine can be equipped with a power source from 1.5kw up to 12kw. BOCHU servo motors and drives for the X ,Y & Z axis, as well as ethercat technology resulting in fast acceleration, fast positioning speeds and fast cutting times.

    The control is by Cypcut and includes software for drawing parts or importing DXF, DWG LXD,& NC files. Class leading components ensure superior cut quality, high reliability and reduced down time.

    High Speed

    Using industry-leading servo motors, offering high positioning speeds of 100m/min helping you achieve higher production efficiency and output in a shorter time.

    High Precision

    High Precision ball screws and linear guides help to achieve a positional accuracy of +or- 0.03mm, and a consistent cut quality.

    Space-Saver & Cost Effective

    Single-platform structure saves space within your workshop, making this machine a perfect choice for those with workshop size constraints.

    Motorised Front Load Table:

    Rather than having to maneuver materials into place within a fixed workspace, you can simply electrically drive out the worktable to access the material from any angle. It is much easier to load and unload materials, saving time and effort, greatly improving working efficiency
    Powerful Dust Removal System:

    Automatic zoning dust removal, effectively removes dust, debris and smoke during the whole cutting process. Safe and environmentally friendly.

    		  
    Cutting Capacity
      1500W 2000W 3000W 4000W 6000W
    Stainless Steel 1-6mm 1-8mm 1-10mm 1-14mm 1-25mm
    Aluminium 1-4mm 1-6mm 1-8mm 1-10mm 1-20mm
    Carbon Steel 1-16mm 1-18mm 1-22mm 1-22mm 1-30mm
    Brass 1-3mm 1-5mm 1-6mm 1-8mm 1-12mm

     

    Name Brand Performance advantage
    Laser Source RAYCUS/MAX PHOTONICS Excellent beam quality under high power, large surface area/volume for gain cut-off, inherent fully enclosed flexible optical path, maintenance-free optical path, single junction diode (pump optical module); over 100,000 hours of service life, small size Light weight, easy integration, high output power, water and electricity saving and cost saving.
    Laser Cutting Head Glorystar/BLT Automatic focusing to improve cutting efficiency; Stable and reliable;

    Servo motor is used for focusing, the focus stroke is large, and thick plates can be cut
    Software System FSCUT Strong compatibility, with advanced function modules such as capacitor edge seeking, electric focusing, plate/ tube cutting, fly cutting, leapfrogging, compensation, power-off memory, etc.

     

    The post Glorystar GS-C – Single Table Fiber Laser appeared first on AFM Europe.

    ]]>         Pearson ZYB Hydraulic Pressbrake https://www.afmeurope.co.uk/product/pearson-bendmaster-eco-cnc-hydraulic-pressbrake/ Thu, 05 Oct 2023 08:43:39 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13776 Bendmaster ECO, high quality, reliable and eco friendly machines designed to enhance your fabrication capabilities.

    The post Pearson ZYB Hydraulic Pressbrake appeared first on AFM Europe.

    ]]>

    • Cybelec Cybtouch 12 Graphical controller
    • Multi axis backgauge. 2 Axis is as standard (X&R Programmable, Z motorised), with options up to 6 axis. (X1, X2, R1, R2, Z1, Z2)
    • Automatic Crowning system 
    • 2 front support arms running on linear rails
    • Energy Saving Servo Motors
    • CE Marked
    • DSP Laser guards and rear Light barrier

    The post Pearson ZYB Hydraulic Pressbrake appeared first on AFM Europe.

    ]]>         GREEN PRESS FX SERVO https://www.afmeurope.co.uk/product/green-press-fx-servo/ Tue, 12 Apr 2022 12:39:08 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13636 New Generation Technology...

    With the rise in the energy prices in the global market, preferability of low energy consumption machines is increasing. In addition to protecting the business profits, consumers shape their productions with the social responsibility awareness such as environmental awareness, effective use of energy resources etc. Setting off from this purpose, Ermaksan combines its experience in producing press brakes for more than 30 years with today’s state of art technologies and offers the new generation Green Press FX Servo Motor press brakes to its users.

    The post GREEN PRESS FX SERVO appeared first on AFM Europe.

    ]]>
  • Steel body with mono bloc welding of ST44 material which is rigid against bending and high tension
  • 6 axes (Y1, Y2, X, R, Z1, Z2)
  • CNC controlled backgauge system with 4 axes (X, R, Z1, Z2) AC servo motor
  • CNC controlled motorized crowning system
  • Top and bottom tools hardened and grinded (835 mm length)
  • Easy clamping top tool holder system
  • Control units; DELEM 66T, ER99
  • 3D colour graphics display and offline software
  • Electric panel with cooling system designed and manufactured from SIEMENS electrical and automation products in compliance with the CE regulations
  • Backlight protection
  • Switch side protection covers
  • Y1+Y2 axis synchronization with a tolerance of 0.01 provided by linear scales
  • CE compliant foot pedal
  • Sliding front support arms with T slot and mm/inch scale
  • 410 mm throat depth (110 – 170 tons)
  • Leuze front light protection system

    •  

    The post GREEN PRESS FX SERVO appeared first on AFM Europe.

    ]]>         ETP SERVO CNC Servo Turret Punch Press https://www.afmeurope.co.uk/product/etp-servo-cnc-servo-turret-punch-press/ Tue, 12 Apr 2022 12:24:28 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13632 ETP CNC servo Turret Punch Press hydraulic-free servo drive construction combines the world’s best brands in hydraulic, electronic and mechanical components. Specifically designed to meet customer requirements; its rigid steel structure + mono block frame allows you to punch up to 6 mm thick sheets.

     

    • Ermaksan Direct Drive servo punch system
    • Fanuc CNC and high precision absolute encoder, dynamic, brushless alfa series servo motors
    • 3 automatic repositioning clamps and loading switches.
    • Ermaksan HMI and software
    • Aluminum workholder
    • Tool lubricating system (Airblow).
    • Free standing control panel.
    • Control with foot pedal.
    • Tools stuck safety system
    • 1 software (Lantek or Metalix).
    • 27 or 33 turret stations
    • Digital oil temperature indicator.
    • Software for using wheel and forming tools.
    • Sheet jumping switches
    • Scrap box.
    • Chain protection around the machine (safety system).

    The post ETP SERVO CNC Servo Turret Punch Press appeared first on AFM Europe.

    ]]>     Faster and with maximum accuracy.
    ETP servo Series is manufactured using the latest manufacturing technologies to suit a dynamic and changing market place

    The post ETP SERVO CNC Servo Turret Punch Press appeared first on AFM Europe.

    ]]>         MBS 350 DGA-V – Semi Automatic Double Mitre Bandsaw https://www.afmeurope.co.uk/product/mbs-350-dga-v-semi-automatic-double-mitre-bandsaw/ Wed, 19 Jan 2022 16:06:06 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13580 Properties
    • The semi-automatic function greatly increases productivity
    • Optional manual or semi-automatic operation
    • Relocatable vice, manual or hydraulic clamping
    • Saw frame tilts (-45° up to +60°), angle can be read on scale
    • Professional band saw with unbeatable price-to-performance ratio
    • Smooth and vibration-free run guarantees high cutting accuracy
    • Optimal power transmission to the wheel via hardened and ground worm shaft and bronze worm gear
    • Adjustable hydraulic cylinder for support pressure regulation of the saw frame

     

    Semi-automatic operating mode:

    • Hydraulic clamping of the vice
    • Hydraulic lowering of the saw frame
    • Lifting of the saw frame

    The post MBS 350 DGA-V – Semi Automatic Double Mitre Bandsaw appeared first on AFM Europe.

    ]]>     Standard accessories
    • Bandsaw blade
    • Material fence
    • Stand
    • Manometer for blade tension
    • Bandsaw blade guiding with carbide inserts
    • Hydraulic quick clamping vice
    • Coolant device
    • Hydraulic cylinder
    • Motor protective switch
    • Automatic shut-down

    Technical specifications

    Cutting capacity round / square 90° 270 mm / 260 x 260 mm
    Cutting capacity flat 90° 350 x 240 mm
    Cutting capacity round / square 45° R 230 mm / 210 x 210 mm
    Cutting capacity flat 45° R 230 x 150 mm
    Cutting capacity round / square 45° L 200 mm / 170 x 170 mm
    Cutting capacity flat 45° L 200 x 140 mm
    Cutting capacity round / square 60° R 140 mm / 140 x 140 mm
    Working height 950 mm
    Bandsaw blade dimension 2925 x 27 x 0,9 mm
    Cutting speeds, stepless 20 – 90 m/min
    Coolant pump S1 100% 100 W
    Motor power output S1 100% 2,2 kW
    Motor power input S6 40% 3,0 kW
    Voltage 400 V
    Machine dimensions (L x D x H) 2010 x 1230 x 1820 mm
    Weight approx. 600 kg

    The post MBS 350 DGA-V – Semi Automatic Double Mitre Bandsaw appeared first on AFM Europe.

    ]]>         RD 820 x 32 Radial Arm Drill https://www.afmeurope.co.uk/product/rd-820-x-32-radial-arm-drill/ Fri, 01 Oct 2021 08:45:11 +0000 https://www.afmeurope.co.uk/?post_type=product&p=13548 The radial drilling machine RD 820 x 32 is a clearly arranged machine with high performance and easy to use. This model is ideal for complex tasks such as drilling, countersinking, reaming and thread cutting.

    Standard accessories

    • Box table
    • Coolant device
    • LED working light
    • Lifting motor
    • Height adjustable protective cover
    • Operating tool

    The post RD 820 x 32 Radial Arm Drill appeared first on AFM Europe.

    ]]>     Properties
    • Mechanical adjustment of the tilting movement of the support and the adjustment of the headstock
    • Smooth surface of column guarantees easy movement of arm
    • Solid construction allows smooth running
    • Easy adjustment to clamped workpiece
    • User-friendly control elements on front of machine
    • Electric height adjustment of swivel arm
    • Wide speed range allows ideal speed settings
    • Thread cutting takes place by change of spindle rotation
    Drilling capacity max. 32 mm
    Thread cutting max. M24
    Distance spindle to column min./max. 310 – 820 mm
    Vertical movement of the support 500 mm
    Travel of drill head (horizontally) 510 mm
    Spindle stroke 250 mm
    Spindle speeds (6) 75 – 1220 rpm
    Morse taper MT 4
    Feed range 0,1 / 0,16 / 0,25 mm/rev.
    Distance spindle to box table 16 – 515 mm
    Distance spindle to base 370 – 870 mm
    Box table (L x W x H) 400 x 400 x 350 mm
    Clamping area base 825 x 690 mm
    Column diameter 200 mm
    Lifting motor 0,75 kW
    Motor power 1,5 kW
    Machine dimension (W x D x H) 1470 x 750 x 2100 mm
    Weight approx. 1200 kg

    The post RD 820 x 32 Radial Arm Drill appeared first on AFM Europe.

    ]]>